help

As anybody (or only me) I stumbled upon a problem on my cabbie that is quite drastically annoying and ruining my paint on the car. I personally don't know how to tackle the problem nor anyone could suggest me what to do, from mechanics to body shops My co drivers doors are hanging a bit down...

Hi, need a bit of paint help. I have an engine panel that was rusted and had paint chips. I decided to take it off, strip it and repaint it. I am a complete amateur and never really done anything like this before so thought it would be good practice. Also as it is under the bonnet it doesn’t...

Took my clocks out because when I bought the car the clocks just bounced from 0 to 10 mph and I’ve found the plastic end is Brocken so I need to find a new cable i have found 2 types 1 at 1100mm long and 1 at 1480mm which 1 if either is right Also attached to the plastic was a little circuit...

Has anybody got wiring diagrams/ colour codes for the dashboard clocks? Bought a 19 yesterday, been messing with it today, tried putting in a couple of different sets of clocks in to get a rev counter mainly. It's not a plug and play affair, which is not a huge surprise. So does anybody have...

Hi all, So my 19 16v is now being stored for six months as it doesnt like this sh***y weather & will be 26 next month. Time to catch up... Pl can anybody confirm the identity of the plug in the image? I have an intermittent issue with it; where the wiring going into it has partially split...

Ok so chucked some water over the family daily beater and noticed there was loads of tar on the rear bumper. We had the roads re surfaced about 2 months ago so thats how long its been on there :oops: anyway i need a cheap but effective way to remove it without causing damage

Hi, Well, shortly after signing up, it now appears that I am in need of a new turbo for the Laguna! Great, baptism of fire with the new wheels. I have tried to do my internet research, but am not 100% clear on whether the MkIII GT205 got the TD04-10T or the 14T like the Megane. I KNOW that I...

Can any one help with panel gaps! My doors have a 6mm gap at the b post and front wings. I can't get the wings any further back otherwise the bonnet won't fit. Do they just have big panel gaps or am I missing something?

Hi, I have an actuator that came fitted to a T3 R5 Gordini turbocharger I bought used, it looks new and I was told it's as the original but it seems to need a fair push to move, I have no idea what boost pressure it is for, does anybody have any ideas please from the numbers on it?

I know i havent been on or posted for a while well a long time but ant help would be appreciated to put my beloved 21 back on the road bedore mot runs out i have bottom end issues which conssits of a sump full of brass shavings and a knocking noise yes youve guessed it the shells would anyone...

I need to terminate a standard copper brake line with a bleed nipple. Every fitting I find seems to be a banjo, which is no good. I need this but without the banjo part. This would work but it's M12 and I need M10 Any ideas?

I bought these OEM injectors - i am planning to hook a piggyback ecu in which i need to key in Injector CC (Flow) and injector opening time in ms (at 13.8v) probably in the range of 0.600 to 1.2 ms OE Einspritzventil Einspritzdüse Düsenstock Injektor RENAULT 2.0 16V 8200058379 | eBay Does any...

Hi Chaps, Some of you may know that none of my wiring is original and i started from scratch so need some advice on getting my electronic oil pressure gauge working. So, just to be sure. Switch in the sump is oil level and it has two connections on it? - Note, Oil level does work when i...

Is anyone here familiar with the Xr25pc software? I have a Williams clio1 engine that isn't running right, it won't run when the map sensor is connected, it was idling between 1000rpm and 3000, I have managed to get the idle to sit around 1000 now that it's warm. I had the xr25 connected but...

my phase 1 Turbo is going in to get the body kit painted just wanted to check on here first as I am getting told it should be a dark grey kit but then others say and some of my homework tells me a black kit Look forward to hearing from you Thanks Jonathan

Keycard goes in . Press brake + Start comes up. Press brake and the start button. LCD shows random characters then nothing happens. Thoughts?

new on here so here goes Ive purchase renault 5 gt 4 years ago and only now getting round to it . This is the best bit took the old turbo off yrs ago and lost it dont ask. Now bought new turbo technics t2 turbo and its got four holes in the turbo housing where do these holes go to oil in from...

Anyone have any tips to stop the downpipe to exhast joint blowing!! No matter what I do it always seems to leak from one side or the other. I'm renewing the flexible joint tension springs mated to standard exhaust... only to find black soot all over the stupid adapter ring thing!! Evidence as if...

As above, anyone know what JB3 S04 is off?

Hello everyone, First thank you Mark Davis for inviting me to come here. I have a 87 Red GT Turbo. After some 6 years gathering parts, it underwent a almost total rebuilt some 3 years ago. Andybond, happy to oblige with the photos barrage... Disassembly : After paint: Engine...