clio

Evening all, I'm in the process of ditching power assisted for good old manual steering and I think I'm having a bit of a blonde moment. Would I be rite in assuming I need the steering colum from non power assisted rack as well as have bolted it on and the uj doesn't reach, any advise greatly...

No mad rush but on the list of wanted seat options so thought I would look what's available 2nd hand Must be in great to excellent condition Thanks DG

ok so its me, i picked up something on a whim as I built 2 in the past. That's literally the only reason I picked it up. it needs a little work and a tidy up and then I might take it to Shakespeare Raceway a few times before they close. Going to do a scrap yard refresh on it to keep it cheap and...

Its been a very long while since i have tinkered with a mk1 clio (non 16v/williams), can anyone refresh me as to some sort of list of possible brake upgrades for the front. Parts from other cars and sizes? I think the basic stuff would be valver parts and they might be comparable to gtt items...

So I've finally fitted all the parts that have been clogging up the spare bedroom for the past couple of months. The list of parts that I had fitted are as follows: ITG Induction kit Forge intercooler Scorpion 2nd cat delete Scorpion non res cat back exhaust H&R lowering springs The car has then...

Hi there, I have a white mk III Clio 197 Cup available for spares and repairs. The Clio is a write off, but there's still a lot of sought after parts available, it has a new/reconditioned gear box and new clutch etc. Message me for parts. Thanks!

Renault Sport Clio 182 Trophy Number 406/500. Capsicum Red 85,500 miles 7 Owners HPI Clear Two Keys MOT March 2018 £8495 For sale is my 2005/55 RenaultSport Clio 182 Trophy. If you’re reading this then you probably know what this car is about. Finished in Capsicum Red, the Trophy was the last...

Purchased some Brembo HC Disc and DS2500 pads from George at RTR. Disc are un-used but the boxes was water damaged and the rear of the disc has surface rust (will do with a few presses of the brake pedal and only on the rear -these discs have never been fitted). Also some DS2500 pads, these...

And its running !

This car was CAT D for light panel damage in 2012. All professionally repaired with new panels and resprayed. 3 owners from new, has had 1 belt change. Car is in good overall condition. Mechanically spot on drivers just as it should. No clutch or gearbox issues which are common. Front wheels...

long shot but I'm after a manifold and downpipe for a turbo set up on a mk1 Clio 16v/Williams please!

I haven't had much time to put anything together in the form of a write up for a little while so my apologies. @Ricardo brought his cool little Renault Sport Clio came over from South End to Milton Keynes for an Enhancement Detail - single stage machine polish - to give the paintwork a boost and...

I am looking for the following parts: Clio Williams Ph2: The door seals (with felt support) left and right (2-door), which are attached to the roof and the A-pillar. Clio 2 Sport Ph3: The OEM manifold Clio V6 Ph2: The OEM stabilizer at the front including the two retaining Rubbers Thanks!

Hi All, I've just been called by my local friendly garage - they've got a 1992 Clio Baccara in from an elderly lady with an automatic gearbox fault. Their transmission specialist says it's likely to be 1st/2nd gear valve chest (just repeating the words said to me), which may no longer be...

I recently purchased this car from a friend who owned it for 8 years. I had plans for the car however things have changed and since bought a Nissan Navara. Much as I would like to keep it, I need the cash for something else. Mileage: 92'319 MOT: Dec 2017 Car comes with lots of paperwork work /...

Hi all. Its becoming clear that I will need a cat/decat pipe to be able to make an exhaust for my project. Does anyone have one spare for cheaps (broken or not). I will still need to cut It up, I basically need the shape and manifold flange. And Would love an oem front 02 sensor aswell. I can...

Anyone that have a Lightweight Flywheel for a 172? Need one for my Megane or else its k-tech Skickat från min SM-G930F via Tapatalk

Its time to show my project, clio mk1 1.6 C3L EFI Turbo it was near to six years finding parts learning and making as perfect as possible with a tight budget in many cases. 1.565cc forged Head ported, uprated valves, springs, etc stage 1 cam MS2 t25+ Custom intake manifold walbro 192lph...

Hey all, Interested in purchasing a Clio 1.8 16v, does anyone have one they'd be willing to part with, or know of any up for sale? They seem to be few and far between these days. All the best, Patrick

Incase you guys are interested, I got started over the weekend. I know its not a turbo, but its still a cool renault build :D I got it in the bay but rain stopped me. Hopefully get it mounted on wednesday eve. Managed to get it out and in within about 4 hours. No still bolts, nothing in...