actuator

Hi, The locking motor / actuator on my drivers door has died. I took the motor out of the door and can see that it has a 4 pin contact. When looking online for a replacement I can only find motors with 2 pins. I looked up the part number (link below) and when doing a search on the part...

Searching left right and centre for a green dot megane actuator. Anyone have any guidance? Thanks

As title, with mounting bracket too, please

As above, needed urgently for mapping at RS in just over a few weeks time. The one I bought has unfortunately been mis-sold and is a 225 unit! If anyone has one or can get hold of one please get in touch as soon as possible. Kind Regards Kirk

Hi, I have an actuator that came fitted to a T3 R5 Gordini turbocharger I bought used, it looks new and I was told it's as the original but it seems to need a fair push to move, I have no idea what boost pressure it is for, does anybody have any ideas please from the numbers on it?

My mechanic has rung to say my actuator on my dini will not hold boost and needs a new one. What do I need to get that will be good to hold 20 psi boost. Think it used to be a T34 actuator on my 21 Turbo but not sure if that fits the turbo on the 'dini'. Anybody point me in the right direction ? :0)

Guys , I have a dash 31 actuator ( unless you tell me otherwise ) The rod has been cut short , but its a good lenght to add your own eyelet on. £25 + £6,50 postage.

Hi All, Wanted to get the collected wisdom on which actuator to use. Currently I have a forge twin port and a GT Tuning T3 single port. What are the pro's and con's if any over a single or dual port?. I will be getting a T25 turbo and ideally want to give the actuator to the turbo company so...

I have a non working actuator in a rear drivers side door of an R19 saloon, I also have a fully functioning one in a cabby drivers side door, heres what i need to know. The two units are quite different as the saloon has the child look etc, what im wondering is can the actuator alone be removed...

Hi Folks, In May i was at Henk's Place in the Netherlands to get the 21 set up with 76mm exhaust and new Turbo. I fitted a Forge Actuator with yellow spring on the Turbo. On the old Turbo, i had an OE Actuator an was running 1,5 bar Boost (22Psi). I didn't touch the Boost controller...

Looking for a wastegate actuator for a 1983 r5 gordini turbo. Ive contacted mecaparts but no reply also renault but not listed any more Any pointers would be great Cheers Joe

Whats the ideal psi for it to start opening and also the ideal psi for it to be fully open? Assuming I want to run about 17psi. Cheers, Pat :icon_smile:

does anyone know how to fiddle with one of these because i think mine may have stopped working as im not getting boost wel at least very little, was running ok this morning then went back out later on harldys any boost boost gauge usualy sits at 1.1 boost t now sits at 0.2 boost? any help?

Hi does anyone know where i can get a new actuator rod for my turbo. mine has brokn due to rust. thanks.

Hi, just considering buying a -31 actuator, i have ebay item 130244032189 in mind, will this fit ok? and will i get any benefits from it or is it a waste of time? my car is a phase 2, only mods are pace intercoolers and straight threw stainless exhaust, induction kit dump valve thats about it...

Hi, just considering buying a -31 actuator, i have ebay item 130244032189 in mind, will this fit ok? and will i get any benefits from it or is it a waste of time? my car is a phase 2, only mods are pace intercoolers and straight threw stainless exhaust, induction kit dump valve thats about it...

has anyone got a good -31 or -34 that they dont want? just sold my turbo and like a complete tit left my new actuator on!?!? toser

Greetings all ,i have just bought a new 31 actuator on ebay and it arrived today but dont now if it realy is one.Numbers on it are 430099, 17 and 91 049 also has pi on it hope someone can tell me if its one before i leave feedback. Cheers..............

See here See that end arm , the one with the hole. I need it. MUST be for a dash 31 actuator mind. I thank you very much ..

used in good working order bought for my 21t but never fitted if any1 intrested pm me with offers thanks, also 4 17inch wolfrace alloys fit 21turbo 5 stud may fit other cars but im not sure need 2 new tyres but other 2 are good pm wiv offers thanks Lee