abs

hi i am looking for a bendix abs pump but cant read the numbers on the broken one

Hi, does anyone know the model number for the bendix abs pump as broken and cant read the numbers? thanks

Just wondering how I go about removing my ABS unit? I know I unplug it, unbolt it and unbolt all the brake lines from it but then do I make up brake lines to to join up the gaps where the ABS unit has been or do I just replace the whole lot? Also whilst my engine is out is there a brake...

when i got the blue ph1 cab there was no feel/pressure on the brake pedal,and the abs warning light was on,i checked the fuse today,it was fine,i cleaned the fuse blades and put it back,there was a groaning noise,the pedal pressured back up and the warning light went out, with the car...

i picked up the blue ph1 cab today, the brakes are foot to the floor non effective, there seems to be enough fluid in the reservoir, it has the bendix abs system,which i have never had in any 19 before,and know nothing about,there is a warning light on the dash, of a car skidding i have seen...

There is a metal piece that holds abs sensors cable in place on front shock absorbers. I am trying to get/buy two of those for my R19 but it seems ebay hasn't got them listed. Those I have got have split and tire has cut through the cable so ABS stopped working because of that. Is there a place...

I have my ABS light on and have the following blink codes 21 (main Solenoid Valve) where is this? is it the multipin on the back of the ABS pump? if so that has been changed to no avail 34 (rear lh sensor open circuit). have checked it and its about 1060 ohms values between 800 - 1400 ohms are...

To fit quadra

Ok so my clutch cable gave up on me, got a new one delivered this morn, as far as I know I dont have abs, so ordered the non-abs cable, after fannyin around an fittin it, its too long. Im told bythe parts man the abs cable is shorter, so im awaiting this new cable, am prayin it fits so I can get...

I have installed front Brembo-calipers (4 Piston) from a Peugeot 406 Coup? with Focus ST225 Discs. (ABS disconnected) This works far better then original 21 Turbo Brakes, but the Brakepedal feels a little strange. A local Renault Dealer told me to remove the ABS -Block and fit an Mastercylinder...

As it says can anyone help or point me in the right direction for one ,I don't mind if an old hub is attached so it can be cut out .Cheers.

Can anyone please tell me the best place to buy a driverside ABS sensor for my 19 16v cab? Or if anyone has a spare for sale? I snapped one when doing my wheel bearings today :cry: Cheers

Has anybody got one they are willing to part with? Or lend or something. I need to sort mine out for its mot.

Hope I am posting this in the right place! R19 cabby (phase 2) ABS light comes on after 1 mile. Brakes work fine. Switch off engine and restart and again ABS light comes on after 1 mile. Any advice on what to look at would be appreciated. thanks

I'm Stoook, after alot of time & effort, I have finally put my phase 1 2wd in for a MOT (after 6 years)! its all good except for a rear wheel speed sensor (ABS). I located the faulty sensor, removed the complete hub (which will also be replaced (Knackered sensor ring)). I completely trashed the...

Hi, does anyone have an ABS wiring diagram for a ph1 19 valver or can tell me or show pics of where the earth is for the system under the bonnet? Help appreciated.:)

Can any1 help?? First off all I can't tell ya if the abs light is on because I'm unsure if theres a bulb in the clockset lol No calipers are sized and all sensors and rings look good. I'm thinking either abs relay or pump?? If so is there any way of checking ect.... Any info would be great...

The problem started just recently. ABS is kicking when i go on slow speeds up to 10mph. In the morning when i do few stops and build up speed everything seems all right. But problem still stays when moving slowly in trafic. Can it be ABS rings? What do you think?

I have recently replacesed all four brake hose and the one under the pump, since then I have been having the following problem. I have bleed the system again with the engine running I all so tried without the engine running but with a pressure bleeder and when doing this i only seam to get a...

Hi all :wave: This seems to be a common problem. My ABS light on the dash is on all the time. ITV/MOT fail The ABS doesnt work now. Used to work occasionaly The hand brake light comes on when I brake using the foot brake? I have read through the FAQ and I think i will start with re...