Modern Megane Ferodo DS2500 / DS1.11 bed in

andybond submitted a new resource:

Megane Ferodo DS2500 / DS1.11 bed in - ds2500, ds1.11

The aim is to bring the pads to full race temperatures, but slowly (too quick bedding results in glazing). This is done by a series of laps where full speeds may be attained but lighter braking pressures are used (i.e. the driver applies the brakes earlier). It is important that the pads are allowed to cool after the bedding process before racing. Ideally the pads will arrive at temperatures in excess of 500°C during the bedding. Pads smoking during the cool-down is not a cause for concern....

Read more about this resource...