Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi,
I recently rebuild a C1J with 1,6 stroker kit, upgrade exhaust manifold, gt2560r turbo and upgrade intercooler.
It made 198 hp at 0,9 bar which is great i think, but it leaned out, so i changed from 135 main jet to 145.
Now the afr is around 11 when cruising.
I did nothing else than...
Hey, i want to put a turbocharger in my Peugot 205 and i want to use to the Solex 32 DIS carburetor from the R5 turbo. I was wondering what this tube on the picture attached is for. Thanks for your answers.
Hi running a slightly tuned 98hk 1.6 Fuego engine on twin 40 webers In my S1 lotus
Europa. bought old stock parts to convert to turbo using Solex 32Dis carburettor.
Is it with worth going down this line or would it be easier making a EFI, type megasquirt.
Any help or experience appreciated...
If you happen to have a carb with a bored out venturi and want to replace it, without heating the carb up and cooling the venturi and ruining it, follow this guide.
Mark the centre of the plug with a centre punch.
Drill a small hole.
Bigger drill needed.
Nerves of steel and a steady hand...
Renault 18 Turbo Solex 32 DIS Carburettor, for turbo applications..
I have for sale a refurbished Solex 32 DIS carburettor for sale, suitable for blow through turbo applications.
It is standard R18 specification.
It's been media blasted, ultrasonically cleaned in paraffin and blown through...
Do you have some janky old carb gathering dust in a forgotten corner of your garage, do you have bits of a carb lurking in box feeling unloved?
If so, sell them to me!
So what’s the correct way to pipe up a Fuel Pressure Regulator on a Renault 5/9/11 Turbo model fitted with a Solex Carburettor??
The details are in the Haynes Manual from many years ago:
But to make it super clear in-case you were searching for this:
A: Vacuum Line to Carburettor
B: Fuel...
Looking at rebuilding my carb shortly and have seen there are a few kits at varying prices. Are they all much for much, or is one better than the others?
Hi guys, you're all well.
Firstly, my carb is off a renault 5 gt but it's on my pinto. I've had it running before and it's been something tried and tested by others.
I cannot get the car to start. I've taken the carb apart, replaced all gaskets, needle valve etc from overhaul kit. Accelerator...
I rebuilt the engine some months ago, rebuilt the carb too. But since the rebuilt the engine runs unstable at idle. I have to keep rpm above 2000rpm so the engine keeps running. When I try to reduce the idle it enters into a cycle where it goes up to 2200-2000rpm and down to 1600-1400 rpm and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.