renix

Hello does anyone know if the renix ignitio. Control module from a Renault 19 can be used in in a renaul5 gtl saga

Hello, so i have some problems with ignition module unit on my alpine, ist there any replacments for this unit? I have tryed to buy one off ebay it was also used and got faulty one -.-

Hello All, Me yet again! As posted elsewhere, the coolant temp and air temp sensors for my car are PTC instead of the more usual NTC. The sensors are no longer made. I managed to acquire an old stock temp sensor - the only one for sale worldwide - but I have had absolutely no luck in sourcing...

Hello. I'm looking for the correct type of air intake and coolant temperature sensors for our 1987 Renault 21 TXE. I used to get a good parts supply from Whitehouse Renault in Tunbridge Wells - they could get legacy stock in and could read chassis and oval plate numbers. But not sure they...

Alright all, does anyone have any info about what is the form of the tacho feed from the renix module to the cluster? On the 19 (and I guess probably others), there's a pink wire that basically goes from one of the pins on the module straight to the dash cluster to drive the tacho. I need to...

Hellou everyvody,can somebody tell me if it pousible to somehow adapt renix 208 unit for knock sensor to work and how?thank you all

Does somebody know if the renix 450 fit to gt turbo?thanks

I have a number of Renix O36s. and a GD turbo that uses the 009s. it I add the pinking sensor would the 036 unit work ok or does the fly wheel lack something for the sensor? or is there anything else missing?

After reading the Renix list I posted. I see that the Swiss GD turbo has a RE046 Renix. does any one know why? Did the Swiss have stricter pollution rules. The Turbo had more or less boost, or?

Found this today. A Renix listing. sorry it is in French It is interesting though.

Does any one know if the 299 renix units were used as a unit on a standerd production car? and not just as replacement units for the GD and Le car 2 turbos. Does any one have copies of the wiring diagrams to change the wireing to make the RX 299 fit the R5 GD turbos and the Le car 2s turbos. I...

Can a RE 036 be fitted in place of the RE 009? If so does you need any changes or additions? What are the modifications needed to replace the 009 or 036 with the RE299?

Okay, I had a pfaff about with the car today after having done some research and found how the data output works, hooked it up and managed to liberate the data stream from the car onto the computer. Someone on the Jeep forums had written a little program that decodes the data stream into some...

Ive had a look at my megasquirt software, and it has a "Renix 44-2-2" flywheel setting for trigger / ignition. Is this the renault ignition / name of the flywheel? I may be able to simplify my electronics by removing EDIS, and use the existing flywheel pickup point if it is.

Hey Does anyone have the pinout for the diagnostics plug on a Renix-managed engine? I know some of it's sensor connectors, rpm etc, but is there any serial data going on in there? --Phil

Where does the black wire goto that feeds the Renix unit.I'm talking about the black wire that is on the double bullit connector which then goes into the loom then through the bulkhead.The grey wire goes to one of the green relays. I had a sudden death experience the other day and would like...