Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Bloody thing, the car has been in my workshop for last week whilst waiting for a new sump to arrive, done the job yesterday and had the car running last night however now I’ve gone to start it and the immobiliser has kicked in! Engine turns over 3 times then nothing. Solid red light on. Had a...
Megane 1 F7R 2.0 16v
Has anyone any knowledge of how to do this. I had 1 done on a 1996 ecu a while back for a cost of about £125.
Am reluctant to pay this again as I only need it to fire up the engine for about an hour to do some checks before my DTA is put on.
I would be able to carry out the...
Does anyone know if renault clip can recode the ecu to the cars immobiliser. story goes im getting some bits for my clio with a mapped ecu, uch and key but i was wondering if the clip can allow me to change just the ecu and recode it without having to swap over the key fob and uch?
Clio mk1 1.8 16v ph2. Brought the car last january, drove back from kent, fine for 2 weeks. i then changed the boot and a few other body pannels and came to start but it was only turning over and not firing, Everything else works on the car. scratched my head and decided to change aload of...
My MK1 meganes key is broke so I have to use a code useing the central locking button to deactivated thr cars immobiliser ... what dose the immobiliser actually immoberlise ? If ist just the fuel pump can a ignition live not be fed to the pump therfore bypassing the immobiliser? .... cheers guys
My 1995 laguna has decided it wont start just clicks doesnt turn over at all battery good and starter only 2 months old wont even bump start, opens fine with the remote key and immobiliser light goes out but when hold key in starter position for few seconds immobiliser light starts flashing...
Ok here goes, I have done alot of searching on my problem and have tried every suggestion out there.
I got the car off my dad and he had experienced starting problems but it had allways resolved itself, i had an idea it was the immobiliser but wasnt to worried as it allways sorted itself out...
Hi, '95 (M reg) cut out on me the other day & would not restart :evil:
RAC came, diagnosed no power going to coil :?
With the ignition on, the immobiliser warning light no longer illuminates on the dash (previously it worked as should; if immobiliser was on it would flash & stay on (until...
Hey peps, got a tiny issue, trying to start a phase 1 cilo 1.4, the key fob flashes but does open doors to cut the Immobiliser off for me to start,
dont know any other way 2 start it.
but in-between where gear lever is there a switch showing to open an close doors an flashing light which...
I want to check the connectors between the immobiliser and ECU on my R19 cabriolet. The Haynes manual says nothing about the immobiliser.
Where should I look? What should I remove to gain access?
Hi there, I have no led on dash for immobiliser and car will not start my scanner is saying immobiliser is still on so is there any way of disabling it also the key will not lock/unlock doors only in keyhole.
Regards Dan
Hi gang, new boy here!!!
Just bought a R19 16v convertible with more keyfob and buttons than you could throw a stick at!
I've got a clifford alarm/immobiliser which i was told to turn the ignition key to 2 and push one of the buttons which now doesnt do a thing so i'm stranded!
My question...
heres a little video showing you how to enter your override code(It only show me entering the first and second and the last digit and what you should get if you enter the code correctly.)
YouTube - Immoboliser Bypass code
i have tried the method of holding in the door lock button but this does not slow down the red flashing light, i have also tried the accelerator pedal and the trip computer button, neither will work to slow down the flashing red led
anyone any ideas how i input the code to bypass the...
RE: '98 Coupe, 2.0 16v.
Hello.
Since getting a water leak into the area where the sensor is, my cars been getting ever trickier to start. It does work still atm, but I sometimes have to exercise levels of patience that noone should have to endure. Can I bypass temporarily?
What about a...
Can anyone tell me where the immobiliser hides on a Phase 2 19 16V as when I took the ignition/steering wheel cowling off alot of the wiring has been cut into by previous owners and it doesn't look original. Any photos that anyone has would be much appreciated as I am not 100% what they look...
Ok so we know that some later ECUs are matched to the plip which disarms the immobiliser.
BUT... what happens if you use a later plip receiver with an earlier non immobiliser ECU? Does it still work (as in, unlock the doors)?
What about if you put it in a car that has no ECU? Just works...
Has anyone managed or is it possible to bypass the Immobiliser in the ECU?
When I swapped the ECU from mine over for another one, the fuel pump primed the fuel line and the starter motor was going but it just wouldn't fire.
I assume it is inhibiting the ignition module via output pin No...
hello i am new to the site i have a renault megane coupe and since the batteries went on my key i cannot get the engine immobilicer of i received the code from renault dealer which was wrong then received code from the internet by giving the vin code and key number i tried imputing this code...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.