c1j gt turbo

Renault 5 gt turbo oil pump | eBay

Is this the correct clutch that people sell as an uprated part for c1j's or is it different, I ask because its quite a bit cheaper than the kits advertised as 5 gt turbo upgrades VALEO Clutch Kit Volvo 480 E 1.7 Turbo

Thought I'd upload photos on here, wont be much fluffy writing just parts and photos Whacked a T28 on my car and run 25psi for a bit needless to say it was very enjoyable but engine that was built 4 years ago didnt like the extra strain and wear. So cracked some inlet collets, valve collet...

Hello! As per title, I am after a c1j engine and box, am also after drive shafts. I am also looking for any auxiliary bits, header tank, ignition module, essentially everything apart from the car. if anyone has all of the above, or some if it, that would be great. cheers grant

I'm looking for a camshaft for the C1J, doesn't matter about what it is or condition. All I really need is the end mounting plate and push-fit spacer on the end of it, a camshaft I've bought for an engine build has it missing If anyone has a knackered cam or the bits I need off a cam let me...

Im after an oil cooler setup. Would prefer the mocal thermostatic sandwich plate but anything considered. I need the whole thing, sandwich plate, lines, and cooler What you got ?! Thanks

Now I know the easy/simple answer is Piper 285, but I want to use something from Cat Cams. My Engine Spec will be as follows: Lightly ported Head Alliance Inlet Manifold matched to head EFI using MegaSquirt 1 running MSExtra (poss upgrade to MS2) and Ford EDIS wasted spark OE Pistons OE Rods...

From the facebook page : If anyone is interested I have most of a 5gtt bottom end stripped down at my dads. It's located in Leicestershire and if anyone would like it they will be more than welcome to collect it free of charge as in the next week or so I shall just tip it. I can't remember if...

As per tittle I am looking for a complete GTT engine / bay, this is not for me but a local friend he requires all pipework boost, coolant, vacuum lines, fuel around the fpr, gtt fpr, Decent carb, manifold's, running engine, turbo, aei, HT leads, good Gearbox, shafts, etc.... I want everything...

Has anyone ever tried offering up a Punto GT inlet manifold to a C1J engine for an EFI conversion rather than having to re-machine the original C1J one? :read.gif: They look similar...

ok so this sucks ass as i have scrapped and given away these bits many times over. Im looking to get together all the bits to gtt swap the engine in my campus. im in need of engine, gearbox, driveshafts, aei and all the assorted bits that go with it. If they are free i will give beer money, if...

So my engine is going out this winter due to headgasket fail. And while i'm at it id really like to up the HP. My goal is somewhere between 150-200hp on a carbed C1J. So i'm asking any tunners who had done that what do i need to do to get there.

Baffled sump kits last 3 £60 posted each

Right guys tips , on removal off the oil filter on the c1j gt turbo , under from arch ?? From the top ?? Tools ?? Time ?? Where did you get tool from etc. Thanks matt

i am rebuild my c1j engine & fitting a piper 285 cam . piper say to run the cam in for 20 mins @ 2500 rpm . all bottom end are new . has anyone had any problems when doing this.

Renault 5 gt tubo High strength head bolts x10.c1j) NEW Location Country: UK County: SOMERSET Price £11.00 Description These 12.9 tensile strength bolts allow a higher torque setting to be used to give the gasket a better seal between the head and the block. Brand new...

Are there any types of oil it likes best/doesnt like? same filter as F7P etc? Recommended spark plugs?